A tablet that is already running in a cold environment has not necessarily demonstrated that it can start there after being switched off. If a cold-chain task requires both behaviors, specify and review them separately before choosing equipment.
Describe the start state
| Work situation | Evidence the buyer needs |
|---|---|
| Device enters the area already running | Permitted operating conditions and task duration |
| Device is switched on after storage | Documented starting conditions and startup result |
| Device restarts during a job | App recovery and preservation of the current record |
| Device needs charging | Separate manufacturer-approved charging limits and procedure |
The public scope of IEC 60068-2-1:2025 distinguishes powered and unpowered specimens in cold testing. Naming the method does not establish that a particular tablet has passed it. Ask which start state the supplier’s evidence actually covers.
Write a task-based acceptance sequence
For an approved sample evaluation, ask the reviewer to include startup, sign-in, opening the required job, recording a result and checking that the record is retained. Where a restart is part of the requirement, include it explicitly. Record the device version, power source, conditions, duration and observed failures. Agree the evaluation conditions with the manufacturer; do not improvise a freezer trial.
The current T1 product information does not establish operation, cold starting or charging at −30°C. Its listed 12,000mAh capacity and IP68/IP69K protection do not supply those missing results. No cold-start test is reported here.
Begin with the general low-temperature evidence checklist. Tell Phonemax whether your task requires cold starting, continuous operation or both so the requirement can be reviewed for the selected configuration.
Laat een reactie achter
Alle reacties worden gemodereerd voordat ze worden gepubliceerd.
Deze site wordt beschermd door hCaptcha en het privacybeleid en de servicevoorwaarden van hCaptcha zijn van toepassing.