Construction Tablets: How to Review a 1.5m Drop Claim

A construction tablet with a 1.5-meter drop requirement needs a test record for the supplied device assembly. The current Phonemax T1 information reviewed here does not establish that specific drop result. Treat the height as a requirement to verify before purchase.

Request a comparable test record

Ask the supplier to identify the tested tablet, case, screen protection and accessories. Record the drop surface, orientations, number of impacts, device operating state and checks performed afterward. A height without those conditions is an incomplete comparison.

Check the functions the site depends on

• Screen readability and touch input for the inspection form.
• Camera capture and attachment to the correct work order.
• Charging, connectors and communication after the stated test.
• Case, port-cover and mounting-point condition.

Agree which failures disqualify a sample before arranging any controlled evaluation. Do not drop a working fleet device as an improvised acceptance test.

Choose on documented evidence

The official MIL-STD-810 scope describes environmental tailoring rather than imposing one universal test specification. Ask which method and conditions support the actual claim. Review the current T1 configuration alongside that evidence. Its listed ingress protection does not supply a missing 1.5-meter drop report, and this guide contains no independent drop-test result.