When assessing a thermal view during motion, distinguish movement of the phone from movement of the target. Changing both at once makes an unclear result harder to interpret and repeat.
Use a controlled observation sequence
| Observation | What it helps isolate |
|---|---|
| Stationary phone, stationary scene | Baseline view and saved output |
| Approved phone movement, stationary scene | What the operator sees while repositioning |
| Stationary phone, safely changing scene | Whether the required change is represented |
| Intended work sequence | Whether the accepted setup supports the actual task |
Have the responsible reviewer choose a harmless scene and an appropriate method. Do not create dangerous moving machinery or heating events to test a phone. Record the device, app mode, movement and relevant conditions so the supplier can interpret the example.
Avoid a single-cause conclusion
If the view jumps, smears or appears delayed, preserve the original observation and ask what evidence distinguishes image updates, detector response, movement and app processing. A frame-rate label alone does not diagnose the cause. A hand-held observation also should not be reported as a laboratory latency measurement.
The P20 Pro thermal specification graphic lists 25Hz refresh rate. This is a manufacturer entry, not a completed motion test. It does not establish an acceptable movement speed or a measurement result for a moving target.
Use the response-interval guide and the sample acceptance checklist to define what needs evidence. Send Phonemax the intended movement and output requirement before arranging a sample review. No motion or thermal-response trial is reported here.
Laisser un commentaire
Tous les commentaires sont modérés avant d'être publiés.
Ce site est protégé par hCaptcha, et la Politique de confidentialité et les Conditions de service de hCaptcha s’appliquent.