Choose a thermal-phone holder using the complete handset dimensions and the fitted accessory arrangement. Thickness alone does not establish clearance for the lens, buttons, port covers or approved charging cable.
Start from current body dimensions
| Model | Published body dimensions |
|---|---|
| R4 GT | 121 × 59.2 × 18.3 mm |
| P20 Pro | 172.6 × 81 × 17.8 mm |
These are current manufacturer handset figures from the R4 GT and P20 Pro product pages. They are not measurements of a phone inside a case, a holder opening or a complete mounted assembly. Neither listing supports describing those handsets as 8 mm thick.
Review the fitted arrangement
| Fit item | Question for the holder supplier |
|---|---|
| Lens area | Can the required thermal and visible views remain unobstructed? |
| Controls | Can staff reach the needed buttons without the holder pressing them? |
| Connection | Does the approved cable and plug have the required clearance? |
| Protection | Can covers and the specified case be used as instructed? |
| Removal | Can the authorized user release and return the phone correctly? |
Request a documented pairing and assess the supplied assembly in a safe, stationary setup. Do not drill the enclosure, reshape a holder or improvise electrical connections to make a mismatch fit. A fitting check does not document vibration resistance or suitability for a moving vehicle.
No holder, cable or installed thermal-camera trial is reported here. The published body dimensions should guide the enquiry, while the exact pairing remains subject to confirmation. See the body-versus-screen checklist and send Phonemax the holder model, case and intended power arrangement before ordering accessories.
Hozzászólás írása
Minden hozzászólást moderálunk a közzététel előtt.
Ezt a webhelyet a hCaptcha rendszer védi, és a hCaptcha adatvédelmi szabályzata, valamint szolgáltatási feltételei vonatkoznak rá.