When comparing a thermal-phone quotation with a packing or shipping record, label each weight by what it includes. A shipment figure should not replace the handset’s published weight, and a component figure should not be presented as a complete phone.
Use distinct fields in the purchasing record
| Weight field | Contents to identify |
|---|---|
| Handset weight | Exact phone model and manufacturer’s stated configuration |
| Carried setup | Phone plus the accessories carried for the task |
| Packaged unit | Phone, supplied accessories and unit packaging |
| Shipping consignment | All included units and the relevant outer packaging |
| Carrier billing basis | Carrier’s documented billing method, kept separate from physical device weight |
Ask the supplier which field a quoted number represents and whether it is measured or nominal. When the contents or packaging change, update the corresponding record. Do not resolve a mismatch by relabelling one category as another.
Keep the buying decision tied to its purpose
A hand-carry limit, a holder requirement and a shipping quotation may each need different information. State the limit and its inclusion boundary before comparing offers. Leave an unexplained difference open until the supplier clarifies it rather than silently treating it as a product specification.
The current R4 GT page lists a handset weight of 190 g; the P20 Pro page lists 394 g. Those are manufacturer handset figures, not packaged-unit or consignment measurements. No 150 g complete Phonemax thermal phone is verified here.
Use the complete-setup weighing guide for the carry requirement. Ask Phonemax for a clearly labelled packing and weight breakdown when preparing an order. No independent weighing or carrier-charge calculation is presented in this article.
Zostaw komentarz
Wszystkie komentarze są moderowane przed opublikowaniem.
Ta strona jest chroniona przez hCaptcha i obowiązują na niej Polityka prywatności i Warunki korzystania z usługi serwisu hCaptcha.