An independent SIM-slot sealing requirement needs a documented design and the correct handling instructions for the supplied phone. A dual-SIM specification does not establish independent seals, and this guide does not verify such a design on a current Phonemax model.
Ask what is actually sealed
Request a model-specific diagram or supplier explanation identifying the tray, covers, gaskets and any shared openings. Confirm which parts users may open, how they are reseated and whether an approved tool or replacement seal is required.
- Identify the exact SIM arrangement and fitted components.
- Review inspection points for a damaged, displaced or contaminated seal.
- Confirm the required closure procedure and maintenance instructions.
- Ask which test report covers the complete offered assembly.
Plan SIM changes as a maintenance task
Follow the supplier's permitted conditions for opening and closing the slot. Do not create an improvised water test to check whether the tray has been reseated correctly.
Use a current configuration reference
The R4-T listing specifies dual Nano SIM. That is a connectivity fact, not evidence of independent slot sealing. Review the enclosure-protection scope in IEC 60529 and request exact-model evidence before accepting an ingress-protection claim for a particular slot design.
Zostaw komentarz
Wszystkie komentarze są moderowane przed opublikowaniem.
Ta strona jest chroniona przez hCaptcha i obowiązują na niej Polityka prywatności i Warunki korzystania z usługi serwisu hCaptcha.